4.MD.B.4 · Original instructional draft
I can build a line plot and use fraction operations to answer data questions.
A line plot records each fractional measurement, including repeated values, and supports sums and differences.
Success criteria
- Place one mark per observation at the right fractional value.
- Keep measurement units consistent in sums and differences.
Before you begin: Locate fractions and add/subtract like-sized fractional units.
Understand the mathematics
An X counts an object with a certain measurement, not an extra unit of length. Repeated values stack vertically. To find the range of the recorded lengths, subtract the smallest value from the largest, using a common fractional unit.
Range: 5/8 inches. Total: 33/8 inches. Each × is one measurement, not its length.
Worked example
Five paper strips measure 1/2, 3/4, 3/4, 1 and 1 1/8 inches.
- In eighths the lengths are 4/8, 6/8, 6/8, 8/8 and 9/8 inches.
- Plot five X marks, including two above 3/4.
- The longest minus shortest is 9/8 − 4/8 = 5/8 inch. Their combined length is 33/8 = 4 1/8 inches.
Check an example that does not fit
Two marks at 3/4 represent two strips, not one strip of length 2 inches.
Diagnostic follow-up
What does one X count? Where should each repeated measurement go?
A single response does not diagnose a misconception. Ask for a drawing, unit, and explanation before deciding what support is needed.
Build, explain, and show your mathematical work
Build a model. Try a problem. Tell someone how you worked it out. Your answers stay on this page and clear on reset or refresh.
Expectation-level coverage and remaining gaps
Open math tools: counters, fractions, and a number line
Try an idea here. These tools do not fill in or check your answers.
Each whole has 4 equal intervals. Count the spaces between marks.
The point is 0/4. It is 0 jumps of 1/4 from zero.
Your tool choices clear when this page reloads. You can use paper or objects instead.
Build a fractional measurement line plot
Each observation is one measured strip. Place all six, including repeats. The axis is labeled in eighths of an inch. A mark counts one strip, not one inch.
| Strip | Length (inch) | Your location |
|---|---|---|
| 1 | 1/2 | |
| 2 | 3/4 | |
| 3 | 3/4 | |
| 4 | 1 | |
| 5 | 1 1/4 | |
| 6 | 1/2 |
| Location (inch) | Marks |
|---|
Explain and review with a person
Say your idea aloud or draw it first. You can ask a parent or teacher to listen. Typing below is optional.
Writing is never automatically scored. An educator should compare the mathematical connections, units and justification with these original criteria. Empty or incorrect explanations are not marked correct by checking boxes.
Original exemplar and another valid approach
The measurements are 4/8, 6/8, 6/8, 8/8, 10/8, 4/8 inches. Their sum is 38/8 = 4 3/4 inches. The longest minus shortest is 6/8 = 3/4 inch. Each observation, including a repeat, has its own mark.
Another approach: Group equal lengths to check the total, counting each mark's length. For the range, subtract only the shortest observed length from the longest, rather than subtracting frequencies.
Read the plot you construct
Use the ribbons data in the builder: 1/2, 3/4, 3/4, 1, 1 1/4 and 1/2 inches. Construct the plot before interpreting the observations.
Original structured task · 4.MD.B.4 · Educator review pending. This task checks entered values and structures. Written reasoning is reviewed separately.
Original entered-part reference
- Locate 3/4 inch on the eighths number line.: 3/4
- Combined length of all six ribbons, in inches: 4 3/4
- Longest length minus shortest length, in inches: 3/4
- Number of ribbons measuring 3/4 inch: 2
This reference checks the requested entries. It does not evaluate a written explanation or certify the student’s method.
Explain and review with a person
Say your idea aloud or draw it first. You can ask a parent or teacher to listen. Typing below is optional.
Writing is never automatically scored. An educator should compare the mathematical connections, units and justification with these original criteria. Empty or incorrect explanations are not marked correct by checking boxes.
Original exemplar and another valid approach
The plot has two marks at 4/8 and two at 6/8, plus one at 8/8 and one at 10/8. The sum is 38/8 = 4 3/4 inches. The range is 10/8 − 4/8 = 6/8 inch.
Another approach: Group the equal lengths first: two halves make 1 inch and two three-quarters make 1 1/2 inches. Add 1 inch and 1 1/4 inches to get 4 3/4 inches.
Source scope: supplied Grade 4 NMIS 3.0 standard panels. All prompts, diagrams, feedback and review criteria here are original. Assessment references and verification limits are recorded in the coverage crosswalk. Independent content and educator review remain pending.
Build procedural fluency
Find 1 1/8 − 1/2.
Hint
Rename the half in eighths.
Solution and explanation
9/8 − 4/8 = 5/8 inch.
Explain: Which plotted values does this difference compare?
Discuss or sketch your reasoning. Explanations need a person to review them; a correct answer alone does not show complete understanding.
Formative assessment
How many strips are represented in the worked line plot?
Hint
Count all marks, including repeats.
Solution and explanation
There are five X marks, one per strip.
Explain: Why is counting only the distinct positions incorrect?
Discuss or sketch your reasoning. Explanations need a person to review them; a correct answer alone does not show complete understanding.
Apply in a new situation
Three strips measure 1/4, 1/2 and 3/4 inch. Find their combined length.
Hint
Use fourths for every measurement.
Solution and explanation
1/4 + 2/4 + 3/4 = 6/4 = 1 1/2 inches.
Explain: Draw a line plot before combining the lengths.
Discuss or sketch your reasoning. Explanations need a person to review them; a correct answer alone does not show complete understanding.
Source evidence
4.MD.B.4. Original instructional interpretation, not an official assessment item or endorsed lesson. Catalog identifiers were checked against supplied PDFs; instructional source verification and independent mathematics, educator and accessibility reviews remain pending. One example does not cover the full standard.