4.MD.C.6 · GRADE 4 LEARNING

Measure and draw angles

A protractor aligns degree units with an angle's vertex and starting ray.

Loading account…← Back to learning

4.MD.C.6 · Original instructional draft

I can measure and sketch an angle in whole-number degrees.

A protractor aligns degree units with an angle's vertex and starting ray.

Success criteria

  • Align the center and the zero baseline with the angle.
  • Read from the correct zero rather than the opposite scale.

Before you begin: Understand degree units and identify the vertex and rays.

4.MD.C.5 4.G.A.1

Understand the mathematics

The protractor's center belongs on the vertex. Its zero line must match the starting ray. Read the scale that begins at that ray. Rotating the whole angle or changing ray lengths preserves its measure.

65 degree angle. Rays share a vertex; the scale starts at zero on the right.0°30°60°90°120°150°180°Turn: 65°

Worked example

Measure an angle that starts on the right-hand zero and opens upward.

  1. Place the protractor center on the shared endpoint.
  2. Match the starting ray to the right-hand zero in this single-scale model.
  3. The second ray reaches 65°, an acute angle. A 115° reading would use the opposite zero. Sketch a new 65° angle by marking from the same baseline.

Measure a turn

65 degree angle. Rays share a vertex; the scale starts at zero on the right.0°30°60°90°120°150°180°Turn: 65°

65°. Lengthening the drawn rays does not change the turn. This scale begins at the right-hand zero.

Check an example that does not fit

Reading 115° from the left-hand zero gives the supplement, not this 65° angle.

Diagnostic follow-up

Where is your starting zero, and which scale begins there?

A single response does not diagnose a misconception. Ask for a drawing, unit, and explanation before deciding what support is needed.

Build, explain, and show your mathematical work

Build a model. Try a problem. Tell someone how you worked it out. Your answers stay on this page and clear on reset or refresh.

Expectation-level coverage and remaining gaps

Open math tools: counters, fractions, and a number line

Try an idea here. These tools do not fill in or check your answers.

2 groups × 3 counters = 6 counters.

Change one count. What changed in your picture?

Explore groups and arrays in the learning pathway →

Your tool choices clear when this page reloads. You can use paper or objects instead.

Place a protractor, measure, and construct

V is the common endpoint. VP is the starting ray and VQ is the second ray. W is a different marked point. Place the protractor center, align the baseline, and select the zero and scale that begin at VP. All controls work without dragging.

Angle diagram with vertex V, starting ray VP and second ray VQ. Tool center not selected, baseline rotation not selected. Use the point and rotation controls to align the protractor.18001503012060909060120301500180VWPQOuter: left zero. Inner: right zero.

The selected tool setup is not yet aligned. The text equivalent will show both scale intersections after alignment.

Explain and review with a person

Say your idea aloud or draw it first. You can ask a parent or teacher to listen. Typing below is optional.

Evidence checklist for student and educator discussion

Writing is never automatically scored. An educator should compare the mathematical connections, units and justification with these original criteria. Empty or incorrect explanations are not marked correct by checking boxes.

Original exemplar and another valid approach

The protractor center belongs at V. Start at the right-hand zero and follow the inner scale to 65°. Rotating both rays together preserves their relative opening; lengthening them does not change their directions.

Another approach: Compare with a 90° quarter-turn: 65° is acute. Use this estimate to check the selected scale, then read the whole-degree ticks.

Explain a measurement and construction

Use the protractor builder to measure from the selected starting ray and construct an obtuse angle. The numbered task below checks angle relationships, not tool alignment.

Original structured task · 4.MD.C.6 · Educator review pending. This task checks entered values and structures. Written reasoning is reviewed separately.

In the builder, V is the common endpoint of rays VP and VQ. Which is the vertex?
Which unit measures the turn between the rays?
A 110° angle is part of a straight turn. Label the remaining angle in degrees.
Original entered-part reference
  • In the builder, V is the common endpoint of rays VP and VQ. Which is the vertex?: V
  • Which unit measures the turn between the rays?: degrees
  • A 110° angle is part of a straight turn. Label the remaining angle in degrees.: 70

This reference checks the requested entries. It does not evaluate a written explanation or certify the student’s method.

Explain and review with a person

Say your idea aloud or draw it first. You can ask a parent or teacher to listen. Typing below is optional.

Evidence checklist for student and educator discussion

Writing is never automatically scored. An educator should compare the mathematical connections, units and justification with these original criteria. Empty or incorrect explanations are not marked correct by checking boxes.

Original exemplar and another valid approach

For a left-starting ray on a horizontal baseline, use the left zero and outer scale. A constructed 110° turn is obtuse. Rotating both rays together or extending them preserves their relative opening.

Another approach: Use a quarter-turn benchmark to check obtuse versus acute, then realign the protractor after rotating the figure. The second ray still spans the same number of degree units.

Source scope: supplied Grade 4 NMIS 3.0 standard panels. All prompts, diagrams, feedback and review criteria here are original. Assessment references and verification limits are recorded in the coverage crosswalk. Independent content and educator review remain pending.

Build procedural fluency

How many degrees is a right angle?

Hint

Use a quarter-turn benchmark.

Solution and explanation

A right angle measures 90°.

Explain: How does this benchmark help check a reading?

Discuss or sketch your reasoning. Explanations need a person to review them; a correct answer alone does not show complete understanding.

Formative assessment

An angle starts at the right-hand zero and its second ray reaches 40 on that scale. What is the angle measure?

Hint

Read from the aligned zero.

Solution and explanation

It measures 40°, not 140° on the reverse scale.

Explain: Should your result be acute or obtuse?

Discuss or sketch your reasoning. Explanations need a person to review them; a correct answer alone does not show complete understanding.

Apply in a new situation

Sketch an obtuse angle of 120°. What smaller turn remains to complete a straight angle?

Hint

Use 180° as the straight-angle benchmark.

Solution and explanation

180° − 120° = 60°.

Explain: Check the sketch against a right angle and a straight angle.

Discuss or sketch your reasoning. Explanations need a person to review them; a correct answer alone does not show complete understanding.

Source evidence

4.MD.C.6. Original instructional interpretation, not an official assessment item or endorsed lesson. Catalog identifiers were checked against supplied PDFs; instructional source verification and independent mathematics, educator and accessibility reviews remain pending. One example does not cover the full standard.

MathStandards reference · Sources & methodology